phreld not monitoring traffic

Support issues for PHREL, the Per Host RatE Limiter.

phreld not monitoring traffic

Postby andyavvua » Fri Oct 11, 2013 6:04 pm

Hi,

We have installed phreld on a CentOS 6.4 install, we have libpcap-(devel)-1.0.0-6 installed.

On our CentOS 5 servers (libpcap-0.9.4-15) we have no issues, on the CentOS 6 installation nothing ever gets blocked by phreld and upon stracing phreld we see output like this from CentOS 6 servers:

Process 269886 attached with 2 threads - interrupt to quit
[pid 269887] restart_syscall(<... resuming interrupted call ...> <unfinished ...>
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL <unfinished ...>
[pid 269887] <... restart_syscall resumed> ) = 0
[pid 269887] nanosleep({0, 750000000}, <unfinished ...>
[pid 269886] <... select resumed> ) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])
[pid 269886] select(5, [4], NULL, NULL, NULL) = 1 (in [4])

etc etc

so it seems there is some issue with libpcap and phreld on CentOS 6. I realise you say that phreld is only tested for libpcap 0.8 but I wonder if you were able to find the cause of the current issues? It could be a trivial fix! It'd be fantastic to have phreld on all of our machines.

Thanks.
andyavvua
 
Posts: 2
Joined: Fri Oct 11, 2013 6:00 pm

Re: phreld not monitoring traffic

Postby sella » Sat Oct 12, 2013 6:37 pm

I'll check it out on CentOS 6 this weekend and see if I can get a patched version out.
User avatar
sella
Site Admin
 
Posts: 81
Joined: Sat Jan 17, 2004 6:53 pm
Location: Denver, CO

Re: phreld not monitoring traffic

Postby andyavvua » Mon Oct 14, 2013 9:09 am

sella wrote:I'll check it out on CentOS 6 this weekend and see if I can get a patched version out.


Thank you, that'd be really appreciated!
andyavvua
 
Posts: 2
Joined: Fri Oct 11, 2013 6:00 pm

Re: phreld not monitoring traffic

Postby Trevis » Tue Dec 30, 2014 8:33 am

Just a quick patch file to get phrel-0.9.4 working under FC4. There were a few issues dealt with (not all cleanly mind you, I'm not that good at C):

* Whilst iptables could create chains (-N) with long names, it wouldn't allow names loger than 28 characters to be used as the jump target (-j) for the new rules in INPUT.


Get Braindumps demos six sigma green belt certification passguide with 100% success prince 2 course Our high quality Testking itil prepares you well before appearing in www.sckans.edu of Stanford University
Trevis
 
Posts: 1
Joined: Tue Dec 30, 2014 8:32 am


Return to PHREL

Who is online

Users browsing this forum: No registered users and 0 guests

cron